Concrete Fastener Anchoring Adhesive.

• Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to elevated temperatures and long-term sustained loads
• Code listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-3372
• Code listed under the IBC/IRC for masonry per IAPMO UES ER-241
• Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
• Cure times: 24 hours at 70°F (21°C), 72 hours at 50°F (10°C)
• Easy hole-cleaning — no power-brushing required
• Suitable for use in dry or water-saturated concrete
• When properly mixed, adhesive will be a uniform gray color
• Available in 22 oz. cartridges packaged either with or without nozzles and in 1-gallon, 10-gallon and 100-gallon kits for high-volume applications utilizing metering pumps
• Manufactured in the USA using global materials
• Tested per ACI 355.4 and AC308

High Strength Threaded Rod & Stud Epoxy

ET-HP is a two-component, high-solids, epoxy-based system for use as a high-strength, non-shrink anchor-grouting material. Resin and hardener are dispensed and mixed simultaneously through the static mixing nozzle. ET-HP is formulated for anchoring threaded rod and full thread studs into concrete (cracked/uncracked) and masonry.