18-8 Stainless Steel Fastener Department  /  Machine Screws 18-8 Stainless Steel  /  Stainless Steel Truss Head Machine Screws  /  1/4-20 Diameter
 

#2 x 2 PHILLIPS DRIVE - POWER BIT - 1/4 HEX DRIVE
#2 x 2 PHILLIPS DRIVE - POWER BIT - 1/4 HEX DRIVE
$1.85
#2 x 2 3/4 PHILLIPS DRIVE - POWER BIT - 1/4 HEX DRIVE
#2 x 2 3/4 PHILLIPS DRIVE - POWER BIT - 1/4 HEX DRIVE
$1.95
#2 x 6 PHILLIPS DRIVE - POWER BIT - 1/4 HEX DRIVE
#2 x 6 PHILLIPS DRIVE - POWER BIT - 1/4 HEX DRIVE
$3.75
1/4-20 Hex Acorn Cap Nuts 18-8 / 304 Stainless Steel
1/4-20 Hex Acorn Cap Nuts 18-8 / 304 Stainless Steel
$7.75
1/4-20 Wing Nuts 18-8 / 304 Stainless Steel
1/4-20 Wing Nuts 18-8 / 304 Stainless Steel
$5.75
1/4-20 x 3/8 T-Nuts 4 Prong 18-8 / 304 Stainless Steel Tee Nut
1/4-20 x 3/8 T-Nuts 4 Prong 18-8 / 304 Stainless Steel Tee Nut
$7.50
1/4-20 x 7/16 T-Nuts 4 Prong 18-8 / 304 Stainless Steel Tee Nut
1/4-20 x 7/16 T-Nuts 4 Prong 18-8 / 304 Stainless Steel Tee Nut
$7.50
1/4-20 Heavy Hex Finish Nuts 18-8 / 304 Stainless Steel
1/4-20 Heavy Hex Finish Nuts 18-8 / 304 Stainless Steel
$7.50
1/4
1/4" x 1" Fender Washers 18-8 / 304 Stainless Steel
$10.50
1/4
1/4" x 1-1/4" Fender Washers 18-8 / 304 Stainless Steel
$11.50

   1  2  3  4  5     

1/4-20 Stainless Steel Phillips Truss Head Machine Screws

  • 18-8 Stainless Steel Includes 303 & 304 Grades
  • 1/4"-20 Right Hand Thread, UNC 
  • Fully Threaded For Use With A Pre Tapped Hole Or Matching Hex Nut.
  • Rust and Corrosion Resistant
  • Truss Head Machine Screws Have a Lower Profile Dome Then Pan Heads. They also Have Wider Surface Area.
  • Standards: ANSI B18.6.3
  • Please View Matching Nuts & Washers Below.